PHOTO OF PARBOIL & DRIER PLANT PLANT THREE STAGE STAINLESS STEEL PLANT SOAKED PADDY STEAMING TANK PROCESS SEPERETLY
THERE IS SEMI AUTOMATIC PLANT, FULLY AUTOMATIC PLANT
RICE FOR CONSUMPTION, HUSK
CAN BE USED IN OPERATION BOILER,
RICE POWDER i.e. RICE BRAN
THE OIL CAN BE EXTRACTED FROM OUR SOLVENT PLANT
AND THE BY-PRODUCT OF SOLVENT PLANTS CAN BE USED TO MANUFACTURE ANIMAL FEED FROM OUR ANIMAL FEED PLANT
1 / HEAT EXCHANGER LOW PRESSUR
2 / SOAKING TANK - RECYCLING THE VAPOUR SO CREATED IN THE SOAKING TANK WHILE BOILING TO REDUCE THE TIMING IN THE BOILING IN ORDER TO INCREASE THE PRODUCTION
3 / DRIER - SPECIAL DRIER WITH MINIMUM TIME IN THE PROCESS AS THE REMOVAL OF MOISTURE FROM THE CHAMBER IS PROVIDED.
24 TONS BATCH IS THE good OPTION OF THE DRIER TO GIVE THE PROPER TREATMENT TO THE PADDY WITH LOW PERCENTAGE OF THE BROKEN RICE.
IF THE CAPACITY IS 96 TONS BATCH MEANS 24 TONS BATCH X 4 DRIERS ARE REQUIRED TO BE INSTALLED
1/5 of world paddy are made into pre-boiled rice. Pre-Boiled rice has fully absorbed the nutrition of rice and has good flavor, also during the course of boiling it killed the pest and make rice easy to store.
We can supply parboiled rice milling plant for you demand.
The production chart flow is:
Parboiled rice use steamed rice as raw material, after cleaning, soak, cooking, dry and cooling water after heattreatment,
then press the conventional rice processing method for life Produced and the product .
Compared with the same level ordinary rice, it has the following advantages:
High nutritional value
Easy to be human digestion and absorption
Grain structure is tight and ratio of winnowed paddy is high
Rice bran haracteristicf high
Storage and easy keeping
Product process details description
In this stage we remove the dust from the paddy,
if the paddy has dust when it is soaking it will pollute the water and influence the nutrition of rice. 2) Soaking. The aim of soaking is make paddy absorb enough water, creat conditions for starch pasting.
During the course of starch pasting paddy must absorb above 30% water,
or it will not be able to fully steam the paddy in next step and thus to influence the quality of rice. 3)Steaming. After soaking the inside of endosperm has got many water, now its time to steam the paddy to realize starch pasting.
Steaming can change the physical structure of rice and keep the nutrition, to increase the production ratio and make rice easy to store. 4) drying and cooling. The aim of drying is to make moisutre reduced from around 35% to around 14%.
To reduce moisture can greatly increase the production ratio and make rice easy to store and transport. 5) Husking. After soaking and steaming it will be very easy to husk the paddy and save energy. 6) Milling. The pearling of pre-boiled rice cost much more time than normal paddy.
The reason is that after soaking the rice is easy to become smectic. In order to avoid this problem we use blowing rice miller, and increase the rotating speed of rice miller,
the rice bran transmission adopt neaumatic type to reduce the friction. 7) polishing and grading. Grading machine is used to separate different quality rice and separate broken rice from the good ones.
Good rice come through the polishing machine, it will make the milling rice become more beautiful color and more smooth, thus to increase the quality of rice. 8) Color sorting. The rice we get from above step still has some bad rice, broken rice or some other grains or stone.
So here we use color sorting machine to select the bad rice and other grains.
Color sorting machine is an important machine to ensure we can get high quality rice. 9) Packing. The finish rice now is ready dear all! Let's use our automatic weighing and packing machine to make them into 5kg 10kg or 50kg bags. This machine is -power-power type, you can set it like a small computer, then it will start working according to your request.
From this machine you will get bag type rice and you can supply your rice to all your customer!